Respirator Filter-JSP-BMN740-000-6AN-A2P3 (F-4123)-Combination Filter Pair-ABS / Activated Carbon-101 x 67 x 63 mm

• A2P3 combination filtration
• PressToCheck daily seal-check technology
• Minimum 99.95% filtration efficiency stated for the P-rated element
• Activated carbon filter media
• Low-profile design and low breathing resistance
• Protective encapsulated casing
• Bayonet connection for compatible JSP respirators
• Reusable classification
• Latex-free and metal-free construction

For selected organic vapour, gas, nuisance-odour, fine-dust and fume hazards when chosen from the contaminant safety data sheet and used with a compatible JSP respirator. Suitability must be confirmed for the specific contaminant, concentration, oxygen level and work conditions before use.

• JSP Australia lists conformity with AS/NZS 1716 and EN 14387
• Current JSP technical information classifies the filter as A2P3 under EN 14387
• The protection achieved depends on the compatible facepiece, fit, correct filter selection and workplace respiratory-protection program
• Confirm the current filter markings, packaging use-by date and site requirements before issue

The JSP PressToCheck A2P3 filter pair combines an A2 activated-carbon element for selected organic vapours and gases with P3 particulate filtration. The low-profile, encapsulated cartridges fit compatible JSP Force Typhoon 8 half masks and Force Typhoon 10 full face masks and allow a seal check each time the respirator is donned.

• Brand: JSP
• Article: BMN740-000-6AN
• Filter code: F-4123
• Classification: A2P3
• Filter type: Organic vapours, nuisance odours and particulate
• Casing: ABS
• Filter media: Pleated media and activated carbon
• Colour: White / Brown
• Quantity: Pair of 2 filters
• Dimensions per filter: 101 x 67 x 63 mm
• Product weight: 231 g per pair
• Inner package dimensions: 7 x 8 x 16 cm
• Inner package gross weight: 273 g
• Manufacturer-stated shelf life: 10 years, subject to packaging and use-by date

• Fit both filters according to the current JSP instructions and perform the PressToCheck seal check every time the respirator is donned
• Wipe the cartridge exterior with a damp cloth and mild detergent without allowing liquid inside
• Do not use abrasives or solvents
• Cleaning does not extend filter life
• Store unopened packs airtight, dry, out of direct sunlight and away from chemicals
• Replace immediately if breathing becomes difficult, breakthrough is detected, the filter is damaged, or the use-by date has passed

Supplied as one pair of two White / Brown A2P3 filters. A respirator mask is not included. These filters are designed for compatible JSP Force Typhoon 8 and Force Typhoon 10 facepieces only. Face-fit testing is required. Do not use in oxygen-deficient or explosive atmospheres, and never force the cartridges onto a different fitting. Select the filter from the contaminant safety data sheet and seek competent advice if suitability is uncertain.