Hard Hat-JSP-ARC170-400-1AN-AS/NZS 1801 / EN 12492-Vented Skyworker Helmet with CR2 Decals-ABS / EPP-53-64 cm

• All-round top, side, front and rear impact protection
• Vented ABS shell with lightweight EPP impact liner
• Four-point chinstrap designed to stay secure under force
• Revolution Flex wheel-ratchet harness with 3D depth adjustment
• CR2 high-intensity reflective decals
• Interchangeable front module with lamp attachment capability
• Universal accessory slots for compatible hearing, face and eye protection
• Extended nape section for added rear coverage
• Replaceable Chamlon cotton sweatband

Designed for assessed working-at-height, climbing, mountaineering, mountain-rescue, rope-access, construction and related industrial tasks. For electrical work, follow the stated voltage limits, current helmet markings, manufacturer instructions and the site risk assessment.

• JSP Australia lists this model to AS/NZS 1801 and BS EN 12492:2012
• The JSP Skyworker range technical specification states full EN 12492 compliance
• The range also meets the mandatory shock absorption and penetration resistance requirements of EN 397
• The range technical information states EN 50365:2002 electrical insulation performance
• Use for electrical work only with the other insulating protective equipment required for the complete system
• Confirm the current product markings and site requirements before issue

The JSP EVO ALTA Skyworker is a mountaineering-style protective helmet engineered for working at height and other assessed high-impact applications. This Australian model is White, vented and supplied with CR2 reflective decals, a four-point chinstrap and a Revolution Flex wheel-ratchet harness.

• Brand: JSP
• Article: ARC170-400-1AN
• Type: Vented Skyworker helmet with CR2 decals
• Shell: ABS
• Impact liner: EPP
• Harness: Textile
• Head size: 53-64 cm
• Colour: White
• Peak: Micro
• Product weight: 500 g
• Impact resistance: 100 J
• Side impact resistance: 25 J
• Operating temperature range: -40°C to +50°C
• Inner pack quantity: 1
• Carton quantity: 10

• Inspect the shell, liner and harness daily for cracking, brittleness, impact damage and other defects
• Replace any helmet subjected to a severe impact, even if damage is not readily visible
• Clean with soap and warm water, then dry with a soft cloth
• Do not use abrasives or solvents
• Do not apply paint, adhesives, labels or non-approved modifications
• Store away from direct sunlight, chemicals, abrasive substances and hard objects
• Under normal conditions, retire after five years of use or ten years from manufacture, whichever occurs first

One White vented JSP EVO ALTA Skyworker helmet with CR2 reflective decals and an adjustable 53-64 cm harness. The accessory image demonstrates system compatibility; the faceshield and ear defenders shown are not included. Refer to the exact JSP Australia product sheet and the current manufacturer instructions before selection and use.