Bump Cap-JSP-ABR000-001-100-EN 812-Long Peak Bump Cap-HDPE / Fabric

JSP Hardcap A1+ Black industrial bump cap with 7 cm peak, EN 812 conformity, reflective piping, ventilation, removable liner and one-handed adjustment for 53-64 cm head sizes. Not a safety helmet.

Key Features

  • Conforms to EN 812 for industrial bump caps
  • 7 cm long peak
  • All-round liner protection from the sides and above
  • Ventilated liner and mesh cover panels
  • One-handed angled adjuster
  • Reflective piping supports visibility in low light
  • Terry towelling sweatband for comfort and absorption
  • Removable liner lets the fabric cover be machine washed

Applications

Suitable for assessed bump hazards around low ceilings, fixed pipework, automated production lines and similar indoor work where a safety helmet is not required. Select head protection through a site-specific risk assessment.

Standards

  • Conforms to and complies with EN 812
  • This is an industrial bump cap, not an industrial safety helmet
  • Do not use in AS/NZS 1801 designated safety-helmet areas
  • Not intended to protect against falling or thrown objects or moving suspended loads

Product Overview

The JSP Hardcap A1+ is a low-profile fabric-covered industrial bump cap for protection against accidental head bumps and scrapes where an industrial safety helmet is not required. This Black model has a 7 cm peak, ventilated liner, reflective piping and a one-handed rear adjuster.

Material and Specification

  • Brand: JSP
  • Article: ABR000-001-100
  • Type: Long peak bump cap
  • Shell: HDPE
  • Outer: Fabric cover
  • Peak length: 7 cm
  • Head size: 53-64 cm
  • Colour: Black
  • Product weight: 198 g
  • Operating temperature range: -10°C to +50°C
  • Inner pack quantity: 1
  • Carton quantity: 20

Care Guidance

  • Inspect daily for cracking, brittleness, impact damage and other defects
  • Replace any cap subjected to impact, even if damage is not readily visible
  • Remove the protective liner before washing the fabric cover
  • Follow the sewn-in care label; the manufacturer states the cover can be washed up to 20 times
  • Do not apply paint, solvents, adhesives or unapproved accessories
  • Store away from direct sunlight, chemicals, liquids and sharp objects

Buying Notes

One Black JSP Hardcap A1+ with a 7 cm peak, adjustable from 53 to 64 cm. This product is only for bump protection. If the risk assessment requires protection from falling objects or an AS/NZS 1801 industrial safety helmet, select a certified hard hat instead.